SAUNA led-ribbon set 2700K, 5m

Versatile Sauna LED Strip and Power Supply

The strip is designed for humid and hot environments, making it ideal not only for sauna lighting but also as indirect light behind bathroom mirrors, in toe kicks, furniture, ceilings, and anywhere a discreet lighting solution is desired. Especially when installed in a LIMENTE SAUNA PROFILE, the light is pleasantly uniform and smooth.

This powerful and trimmable LED strip is specifically designed for the demanding conditions of a sauna. The 120-degree beam angle distributes light beautifully and evenly, allowing for the creation of impressive light effects on the walls. The strip is engineered to withstand heat up to 100 °C and is moisture-protected (IP65), making it a perfect fit for the sauna environment. It features high-quality LEDs as standard, with a color rendering index of CRI>80, an efficiency of 168 lm/W, a light output of 1010 lm/m, and a color temperature of 2700 K (minor variations in color temperature may occur between production batches).

The strip comes standard with a fixed 300 cm cable at both ends. Having a power supply cable at both ends allows the LED strip to be used in two separate parts. This way, unnecessary waste is avoided, and the strip can be installed in two different directions from the power source. The LED strip must be used with a compatible 24 V IP67-rated power supply, which can be placed in a damp space but must be installed outside the sauna (maximum operating temperature for the power supply is 50 °C). The connection of the supply cable to the power source must be made in a junction box with the correct IP rating (not included). Suitable options are listed with the products. The sauna profile is available separately.

Dimming and lightcontrol

The power supply for the SAUNA-LED and SAUNA-NEON strips must be connected to a fixed switch, allowing the lights to be turned on and off. NOTE! The power supply for the SAUNA-LED and SAUNA-NEON strips is non-dimmable.

Installation

Installation of the LIMENTE SAUNA luminaire is quick and easy to perform.

The SAUNA-LED is attached to the desired location either with the included fasteners or with the separately available SAUNA profile. The luminaire's fixed 3m supply cable is routed to the power supply, which must be placed outside the sauna (maximum operating temperature for the power supply is 50 degrees). The supply cable is connected to the power supply in a junction box with the correct IP rating (not included).

The SAUNA-LED can be cut every 5 cm and features a fixed 3m power supply cable at both ends, meaning you can use both ends separately if needed. The strip can be mounted either with the included clips or into the SAUNA PROFILE, which is available as an accessory.