LIMENTE VITA 10 chrome | 230 lm, CRI>80

A decorative, modern furniture light fixture

LIMENTE VITA 10 is a beautiful light fixture with a modern design. In addition to being a great working light, VITA 10 also sheds ambient light from its sides, which creates a gorgeous light effect on the surface to which the fixture is installed. The fixture includes quality LEDs, which spread light evenly across a surface. Wide-spread, even light is always pleasant and suits both kitchen workspaces and showcases, as well as different kinds of shelves.

Due to their excellent luminosity, the fixtures can be placed up to 60-80 cm apart. When the fixtures are placed on both sides of the cooker hood, you’ll receive excellent lighting to your cooktop! LIMENTE VITA 10 is also very thin (only 9 mm) making the fixture barely visible when installed in a kitchen workspace, for example.

Dimming and lightcontrol

Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cosy by dimming your LIMENTE VITA 10 with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.

LIMENTE VITA 10 is dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE series 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.
LIMENTE VITA 10 is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.

Installation

LIMENTE VITA 10 is quick and easy to install. Attach the fixture in place under the furniture with included installation tools and screws. The chrome shade is placed on the body of the fixture and pushed in place.

The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the VITA 10 fixture. The fixtures can be installed up to 60-80cm apart.
There is a 5cm + 300cm long power cord at the end of VITA 10. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.
All electrical connections are done with quick connectors.