LIMENTE DECKER 4000 K, IP44, aluminium | 192 led/m, 1512 lm/m, CRI>85

Accent lighting to highlight shapes and furniture in your home

LIMENTE DECKER B illuminates both forward and to the sides. The fixture comes with a separate attachment board, which fits the power supply cord of the led strip. Use LIMENTE DECKER B to highlight the shapes of your furniture by installing the fixture between your furniture to create a stylish light beam or use the fixture as general functional lighting e.g. inside a mirrored bathroom cabinet to have a pleasant, three-way lighting. The light is stylish and continuous with no connection points interrupting the light, which provides even light throughout the area.

See ”Installation pictures” for tips on how to use DECKER B to illuminate furniture in the kitchen or in the bathroom. LIMENTE DECKER profiles are available in multiple lengths (2-6m) and three different color temperatures (3000K, 4000K and 2700K-6000K) in both IP20 and IP44 versions. The profile itself has a standard length of 2m and can be shortened to a desired length.

LIMENTE DECKER B is available in standard lengths of 2 and 4 meters. The fixture can be shortened to a desired length at 3,3 cm intervals. LIMENTE DECKER B comes with quality LEDs with a color rendering index of Ra> 85, an efficiency of 126 lm/W, a luminosity of 1512 lm/m and a color temperature of about 4000K (small color temperature differences may vary by production batches). The fixture includes a matte protective glass diffuser, which makes the light even and continuous and makes the light a bit warmer in light color. All technical values are given to the led strip without a diffuser.

In addition to LIMENTE DECKER B, LIMENTE DECKER is available in two different versions: the LUX collection version LIMENTE DECKER LUX (IP44, Ra>90, 3000K and 4000K) and the color temperature adjustable CCT version LIMENTE DECKER IP44 CCT (IP44, Ra>80, 2700K-6000K).

To use LIMENTE DECKER, you’ll need a suitable 24V power supply. Compatible products are mentioned alongside the product. The profile, the led strip and the power supply are also sold separately. N.B.! The power supply must be ordered separately.

Dimming and lightcontrol

Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cozy by dimming your LIMENTE DECKER with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.

LIMENTE DECKER B is dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE series 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640543, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.
LIMENTE DECKER B is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.

Installation

LIMENTE DECKER B is fast and easy to install. Simply fasten the attachment board to the desired place with screws and attach the fixture by pressing it onto the attachment board.

The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the DECKER profile. A power supply cable at both ends of the fixture enables DECKER B to be used as two separate lights. The fixture can be shortened to a desired length at 3,3 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.

When installing, cut the profile into the desired length and attach in place with the installation tools and clips included. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors.