LIMENTE RIBBON CCT 24 V, 2700 - 6000 K, IP44 | 196 led/m, 1500 lm/m, CRI>90

A versatile LED strip with color temperature adjustment

LIMENTE RIBBON IP44 CCT LUX is a part of LIMENTE CCT collection, which is not only dimmable but the color temperature is adjustable. When adjusting the color temperature of lighting in your home, you can change the ambience to suit any mood. RIBBON IP44 CCT LUX is an efficient led strip with LEDs very close to each other (196 LEDs / m). You can use RIBBON either in a kitchen as working light or as indirect light behind mirrors, in plinths, in ceilings, and in any space, where the light source needs to be as invisible as possible. The light is stylish and continuous as well as pleasantly even especially when installed on LIMENTE LIGHT PROFILE.

LIMENTE RIBBON IP44 CCT LUX is available in standard lengths of 2 and 4 meters. The led strip can be shortened to a desired length at 6,6 cm intervals. LIMENTE RIBBON IP44 CCT LUX comes with quality LEDs with a color rendering index of Ra> 90, an efficiency of 105 lm/W, a luminosity of 683 - 1505 lm/m and a color temperature of about 2700-6000K. The fixture includes a matte protective glass diffuser, which makes the light even and continuous and makes the light a bit warmer in color temperature. All technical values are given to the led strip without a diffuser. In addition to LIMENTE RIBBON IP44 CCT LUX, LIMENTE RIBBON is available in two different IP44 versions: the standard version LIMENTE RIBBON IP44 B (IP44, Ra>85, 4000K) and the LUX version LIMENTE RIBBON IP44 LUX (IP44, Ra>90, 3000K and 4000K). The led strip is also available as an IP20 version: LIMENTE RIBBON IP20 (IP20, Ra>80, 3000K and 4000K) for indirect lighting. There is a 150cm + 150cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. A power supply cable at both ends of the fixture enables LIMENTE RIBBON IP44 LUX to be used as two separate lights. To use LIMENTE RIBBON, you’ll need a suitable 24V power supply. Compatible products are mentioned alongside the product. The profile, the led strip and the power supply are also sold separately. N.B.! The power supply must be ordered separately.

Dimming and lightcontrol

Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cozy by dimming your LIMENTE RIBBON IP44 CCT LUX with our wireless system. You can use the same switch to adjust all the LIMENTE CCT lights in the room. The light and color temperature adjust smoothly at the same time while creating ambience for working, entertaining or any mood in between.

LIMENTE RIBBON IP44 CCT LUX equires the dimmer LIMENTE SMART 560 (no. 640560) and the wireless wall switch (no. 640561 and 640562) from our LIMENTE SMART series to use. The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.

Installation

LIMENTE RIBBON IP44 CCT LUX is fast and easy to install. The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the RIBBON led strip. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors. RIBBON IP44 CCT LUX can be shortened to a desired length at about 3,3cm intervals. A power supply cable at both ends of the fixture enables LIMENTE RIBBON IP44 CCT LUX to be used as two separate lights. LIMENTE RIBBON should always be installed on a heat conducting surface, such as the LIMENTE LIGHT PROFILE, to guarantee the lifetime of the LED’s. When using the profile, it’s possible to install LIMENTE RIBBON for example under a drying cabinet. The profile also includes a matte protective glass diffuser, which makes the light even and continuous. In any case, make sure the surface is clean and dry before attaching the led strip.